Features: Fully compliant with emergency lighting equipment standard IEC 60598-2-2, out LiFeP04 batteries replace older NiMH, NiCd and lead-acid types typically found in emergency devices. In continuing zencontrol's commitment to...

The emergency converter is the simplest way of adding emergency lighting to existing luminaire designs. The converter supports environmentally friendly, long life and high-performance Lithium Ion Phosphate batteries (LiFePO₄).

Features: All batteries are supplied in a battery holder. Fully compliant with emergency lighting equipment standard IEC 60598-2-2, out LiFeP04 batteries replace older NiMH, NiCd and lead-acid types typically found...

Features: All batteries are supplied in a battery holder. Fully compliant with emergency lighting equipment standard IEC 60598-2-2, out LiFeP04 batteries replace older NiMH, NiCd and lead-acid types typically found...

LED 40 W Combo driver features switched live input for mains switch / sensor, switched live input for connection to mains sensor, adjustable 40 W maintained output, and is Compliant to Australian, and international, safety & performance standards.

LED 40 W Emergency Combo driver features switched live input for mains switch / sensor, switched live input for connection to mains sensor, adjustable 40 W maintained / 4 W emergency output, and is Compliant to Australian, and international, safety & performance standards.

zencontrol's DALI PIR sensors are powered directly from the DALI bus and have inbuilt PIR, lux and colour sensors. The sensors are delivered in a recessed mount for easy mounting into ceilings/surfaces, but it's small form factor also allows for easy integration into products and projects. See accessories for other easy mounting options such as surface or conduit mounting kits.

zencontrol's DALI PIR smart plug-in sensors comes with an RJ12 cable and can be plugged directly into a smart driver, they have inbuilt PIR, lux and colour sensors. The sensors are delivered in a recessed mount for easy mounting into ceilings/surfaces, but it's small form factor also allows for easy integration into products and projects. See accessories for other easy mounting options such as surface or conduit mounting kits.

Wiring becomes simpler and easier when using our 6W Starter plug with the zencontrol Room or Blind controller. For each room simply connect all light fittings, sensors, switches and emergency lighting together and back into a single channel on the Room or Blind controller.

The zencontrol 70mA DALI Power Supply (PSU) is ideal for stand alone DALI installations. Providing power to one DALI line of up to 30 devices, the compact form factor of the zc-psu-70 makes it ideal for mounting inside standard wall boxes and luminaries.

zencontrol's DALI PIR sensors are powered directly from the DALI bus and have inbuilt PIR, lux and colour sensors. The sensors are delivered in a recessed mount for easy mounting into ceilings/surfaces, but it's small form factor also allows for easy integration into products and projects. See accessories for other easy mounting options such as surface or conduit mounting kits.

zencontrol's DALI PIR smart plug-in sensors comes with an RJ12 cable and can be plugged directly into a smart driver, they have inbuilt PIR, lux and colour sensors. The sensors are delivered in a recessed mount for easy mounting into ceilings/surfaces, but it's small form factor also allows for easy integration into products and projects. See accessories for other easy mounting options such as surface or conduit mounting kits.

Conduit mount kit for selected zencontrol models as listed

The zencontrol DALI application controller and Ethernet DALI gateway provides many of the same features as the room controller in a DIN mount package. An application controller can be used when all devices are to be controlled together, for lines of emergency fittings and applications where some manual commissioning is acceptable.

DALI field mounted application controller and Ethernet DALI Gateway

The DALI sensor adapter for mains rated sensors allows you to use any sensor or switch with a 220-240V output as a DALI-2 input device.

The simple and intuitive zencontrol rotary gives you control. With the zencontrol control system the rotary is ideal for tunable white control. You can rotate for brightness, press for on/off or adjust the colour temperature from cooler to warmer.

DALI volt-free relay, DIN mount, for switching non-dimming loads.

The zencontrol DALI-2 Power Supply(PSU) provides power to one DALI line, this DALI line may contain emergency lighting, regular lighting, sensors, switches or colour changing controllers.

With its practically unlimited control the switches can be configured to preform almost any task. Connect the zc-switch to any standard volt free push-button, matching the lighting control panels to the buildings décor.

The zencontrol Slimblade Smart Exit is a simple plug and play solution, adding less than a 50 mW to the standby power. DALI certified and with easy plug-in upgrades for battery and test switch.

Emergency upgrade kit for selected zencontrol Smart drivers.

Use zencontrols illuminated push-buttons in common wall plates for a tactile feel and illuminated feedback. zencontrol supports multiple profiles, which allows the functionality of switches to change during different periods of the day (daytime, afterhours, generator, emergency, security walkthrough, cleaners). This ability gives greater flexibility, comfort and control.

Features: A compact Microwave sensor with a wide detection area suitable for indoor use, internal, wall or ceiling mounting. Switching capacity max. 800W Supplied with 170 mm cable ready to...

Recessed mounting kit for selected zencontrol models, includes spring metal clips for mounting onto metal enclosures.

Wiring becomes simpler and easier when using our plugs with the zencontrol Smart driver.

Smart spot, emergency luminaire, perfect for pairing with a Smart Driver and converting traditional lighting into emergency.

Surface mount kit for selected zencontrol models, as listed.